Summary:You can choose any of the two ways of entering the sequin function code to complete and create any kind of sequin stitch...
You can choose any of the two ways of entering the sequin function code to complete and create any kind of sequin stitch.
For manual sequins, if the "Allow Sequin Switch" option in the "Auto Sequin" page is not selected, you need to insert the sequin function codes one by one. Partially input stitches and insert sequin function codes one by one alternately. If you select the option "Allow to set sequin switch", you can insert sequin function codes one by one after inputting complete stitches with single needle and manual single needle, which can better control The interval of the sequins.
When entering stitches, it is necessary to strictly control the position, stitching and angle of the needle position of the lower sequins. The position of the lower sequins must be prevented from being stabbed by other needle positions. During the stitching process, the dispenser collides with the embroidery thread, which causes the electric sheet and the thread to break, while the covered thread of the sequin is realized by using a manual single needle or inserting stitches one by one in the needle position editing tool after inserting the sequin code. The shape required by the method is usually a certain symmetry, and the stitch length is the same. For example, the three-line star is the "Mercedes-Benz" logo, but it is difficult to strictly implement these requirements by manual input, and it is very cumbersome and error-prone. It is usually difficult to input successfully at one time, and it needs to be adjusted several times with the needle position editing tool, which leads to the need for stitch-by-stitch adjustment with the needle position editing tool during revision, which is very inefficient.
Manual sequin play must pay special attention to the stitch angle when sequins are placed. After completing a pattern, it is necessary to carefully detect and correct those stitches with wrong angles, and when sequins are continuously placed, the sequence of stitches should be optimized as much as possible. to reduce unnecessary repetition of stitches.
