Machine embroidery is a multi-step process with many va […]
Machine embroidery is a multi-step process with many variables that impact the quality of the final product, including the type of fabric to be embellished, design size, stabilizer choice and type of thread utilized. The basic steps for creating embroidery with a computerized embroidery machine are as follows:
Purchase or create a digitized embroidery design file that works with the brand of machine and fabric to be embellished. Creation may take hours depending on the complexity of the design, and the software is costly.
Edit the design and/or combine with other designs.
Load the final design file into the embroidery machine, making sure it is the correct format for the machine and that the stitched design will fit in the appropriate hoop.
Determine and mark the location of embroidery placement on the fabric to be embellished.
Secure the fabric in a hoop with the appropriate stabilizer, and place it on the machine.
Center the needle over the start point of the design.
Start and monitor the embroidery machine, watching for errors and issues. Troubleshoot any problems as they arise. The operator should have plenty of needles, bobbins, a can of air (or small air compressor), a small brush, and scissors..
Remove the completed design from machine. Separate the fabric from the hoop and trim the stabilizer, loose threads, etc.