Adjustment of the cylinder throttle valve of the embroidery machine unit

Update:31 May 2019
Summary:

1. Move the sequin device lifting switch to make the de […]

1. Move the sequin device lifting switch to make the device move up and down.

2. The device drops without buffering. Adjust the “Dropping Adjustment Screw” to adjust it to the inside and adjust it to the appropriate cushioning effect. If the descent buffer is too large to cause the sequin device to slow down, the "down buffer adjustment screw" is finely adjusted outward.

3. The device rises without buffering. Adjust the "rising buffer adjustment screw" to the inside and adjust it to the appropriate cushioning effect.If the rising buffer is too large to cause the sequin device to rise slowly, the "rising buffer adjustment screw" is finely adjusted outward.

4. In actual use, such as adding a regulating valve on the cylinder to counteract the buffering effect, greatly reducing the buffering effect. If the appeal adjustment method does not adjust the buffering effect in the first scheme, it is recommended to adopt the second scheme to cancel the regulating valve and not use the regulating valve. This is simpler and the slowing effect can also meet the requirements.

Copyright © Zhejiang Lejia Electrical Machinery Co., Ltd. All Rights Reserved.

Web Support By :HWAQ